Speed & temperature
Grease consistency and base oil viscosity should suit bearing speed and operating heat.
Industrial grease supplier · Bengaluru
Industrial grease for machinery.
Request greases for bearings, crushers and heavy machinery in Bengaluru—matched to load, speed, temperature, water exposure and relubrication interval.
EP 2EP 0 / EP 00Lithium greaseHigh-load optionsSpeciality grease
Share the bearing or component, speed, load and current grease label if available.
Selection essentials
Lubrication that stays in place.
Grease choice combines base oil, thickener, consistency and additives. A familiar colour is not a reliable substitute for the required specification.
Share application detailsEP protection
Extreme-pressure grease categories for loaded contacts and demanding industrial duty.
EP 0 & EP 00
Softer grades for certain centralized lubrication systems and enclosed gear applications.
Water & contamination
Operating exposure and washout risk influence thickener and additive selection.
Fast selection path
Follow the lubrication point.
Grease selection starts with the component and conditions—not with colour or a familiar product name.
- 1
Name the point
Share bearing, pin, bush, open gear or centralized system.
- 2
Capture the reference
Send NLGI grade, thickener, old label or equipment manual.
- 3
Describe the duty
Note speed, load, heat, water, dust and vibration.
- 4
Plan relubrication
State pack size, consumption and relubrication frequency.
Common applications
Where oil cannot stay.
Rolling bearings
Crusher machinery
Construction equipment
Chassis lubrication
Centralized systems
General industrial equipment
Common enquiry language
How grease requirements are described.
Consistency is only one input. Thickener, base-oil viscosity, additives, temperature and component speed all influence selection.
Confirm equipment requirement
NLGI 2Common consistency
Widely requested for manually lubricated bearings and general points.
NLGI 0 / 00Softer consistency
Often discussed for centralized systems or applications requiring easier flow.
EP greaseLoad protection
Extreme-pressure additives are considered for loaded and shock-duty contacts.
Thickener typeCompatibility factor
Lithium and other thickener systems should not be interchanged by assumption.
Lubrication-point support
Keep the correct grease connected to the point.
A clear application record helps prevent accidental mixing and makes repeat ordering more consistent.
Compatibility review
Compare thickener, base oil, consistency and performance before changing products.
Point identification
Label grease guns and lubrication points to reduce cross-application during maintenance.
Consumption planning
Share cartridges, pails or drum requirement and the relubrication cycle for quoting.
Quote industrial grease
Share the point, load and grade.
We’ll review the known application and quote available products against your quantity.
Industrial grease FAQs
Before changing a grease.
Greases that look similar can behave differently under load, temperature and water exposure.
What does NLGI 2 mean?
NLGI grade describes grease consistency. It does not by itself identify the thickener, base-oil viscosity, additives or suitability for a particular bearing.
Can different coloured greases be mixed?
Colour is not a compatibility test. Check thickener, base oil and product compatibility before mixing, and follow a proper changeover process when required.
What is the difference between EP 2 and EP 0 or 00?
The numbers mainly indicate consistency. EP 0 and 00 are softer and may suit certain centralized systems, while EP 2 is firmer. The equipment requirement remains decisive.
What information helps select bearing grease?
Share bearing type and size, speed, load, operating temperature, water or dust exposure, current grease and relubrication interval.
Explore more